|
|
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
1980s Special Jump Helmet
Hi Guys, I'm hoping that there are some exAirborne guys within the Forum that can shed some light on this chromed jump helmet that I've just picked up. It appears to be late 1980s era and rigged in a unique way. The helmet is chromed with a Canadian Airborne badge welded to the front. The liner is set up in such a way that I can't easily remove it to see if there is anything on the outside of the liner. I'm guessing this is an award helmet that was meant to be used to draw attention to a particularly good, or bad trooper during a jump.
I hope someone can fill me in. Regards, Greg |
#2
|
||||
|
||||
Very cool piece Greg!!
It looks like it has next to no wear to the liner.
__________________
I’m always interested in purchasing 1st Canadian Parachute Battalion memorabilia. |
#3
|
||||
|
||||
I agree but all the straps are meticulously taped so that it's impossible to undo the chinstraps to pull the liner apart. There has to be a "method to the madness". There are no personal marks that I can find, leading me to believe that it was made for an occasion and the liner a custom fit for a particular jumper.
Greg |
#4
|
||||
|
||||
Parachute display team?
Could of been used by a parachute display team maybe, i think your canadian airborne one is called the hawks.
Paul |
#5
|
||||
|
||||
Looks like an item that would have been on display in a mess or legion. I can see the tape on the nape strap (a standard jump helmet would have a foam pad attached to the nape strap) but you should be able to unsnap the straight chinstrap from the liner and then separate it from the shell.... or is there something not visible in the photos?
|
#6
|
||||
|
||||
Way out of my comfort zone with this one but it looks like a helmet worn by an "Honor Guard", with white laces in the jump boots!
Gordon |
#7
|
||||
|
||||
Greg
As a paratrooper with the Cdn AB Btl Gp in the 80's, I have only seen this type of helmet shell twice. First time was at the Cdn AB Centre in Edmonton around 1987, whereby the chromed outer was hung from the trg suspension harness and we drank from it at the Grad "smoker". That one had the badge upside down as it was rightsideup when the shell was suspended inverted. The other time was in Pet around 1988, when I saw this type of helmet worn by a CWO jumper on his last jump before retirement from the CAF. Special Occasion helmet would be an accurate guess. Best I can do and hope it is of some help. regards Darrell 04688
__________________
"Was it over when the Germans bombed Pearl Harbor?" |
#8
|
||||
|
||||
In Taipei, Taiwan the honour guard at the Chiang Kai-shek memorial wear similar chromed helmets.
David |
#9
|
||||
|
||||
OUTSTANDING! David, so it is a "last jump" helmet. I appreciate the help.
Regards, Greg |
#10
|
||||
|
||||
I cannot add anything to this topic, I just want to comment WOW that has to be one of most lovely skid lids I have ever seen. Sort of reminds my of the chrome dome Neidimeyer wore in the movie Animal House.
Where on earth did you get this little gem from?
__________________
Cliff http://www.irishregimentofcanada.ca |
#11
|
|||
|
|||
Jumping To Conclusions
Before you go and jump, or perhaps parachute, to the conclusion that this chromed Type 2 Parachute Helmet is someone's 'last jump helmet', sit back, reload and re-read the posts. You have basically three potential options for this helmet, 1 - it is a mess item, 2 - it is a legion item, or 3 - it is some sort of presentation piece.
A nice helmet, but do not get too excited that it was someone's 'last jump helmet' before you know for sure. |
#12
|
||||
|
||||
Damn! Ed beat me to it.
Although the suggestion is plausible it holds no more authority than any militaria show wisdom. This item may be researchable by going through copies of the "Maroon Beret" the unit magazine of the Cdn AB Regt, as well as back copies of the R22eR, PPCLI and RCR magazines. If it is a 'last jump' helmet there is a good chance that this event would have been recorded. Clive (Maxwell House coffee and the Canadian Airborne Regiment - Good to the last drop)
__________________
Those who live by the sword will be shot by those of us who have progressed. |
#13
|
||||
|
||||
I have seen pictures of US Army troops wearing these plated helmets on parade.
The chin strap on the metal outer looks like the type used by the US Army in the 1960s and 1970s. It is not the chin strap that I had on the helmet I was issued with in 1985. I am thinking an American helmet that somebody has put a Canadian Airborne cap badge on. Do you have a better shot of the badge? It looks like it has been plated. Phil
__________________
Courtesy of The Canadian Forces: https://www.canada.ca/en/department-.../lineages.html Quod gratis asseritur, gratis negatur Hanlon's razor: Never attribute to malice that which can be adequately explained by stupidity. |
#14
|
||||
|
||||
Guys, I way out of my element here as I generally don't collect helmets.
I have two copies The Maroon Beret, the 20th Anniversary issue and the 25th Anniversary issue, neither shows a chromed helmet. I'll have to go through Tin Lids to find out what a Type 2 Parachute Helmet is. I can't take the liner out without undoing all the buckles and I wouldn't be able to put it all back together again. What I can tell you is that the liner come out approximately 1 cm, when it goes back in it really smells I don't know much about chinstraps. It appears to be consistent with the types I've seen in my fathers' collection from his time in the militia. I know he was issued a slider buckle version just before he retired but wore one similar to my example. I'll take a pic of the badge and post it. Greg Last edited by GregN; 19-06-13 at 03:42 AM. Reason: adding pics |
#15
|
||||
|
||||
Quote:
|
|
|