|
|
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
c1900 Rank Crown (Staff Sgt Type)
Hi All
Does anyone have a spare c1900 gilding metal rank crown (die stamped) knocking about their spares box? Size approx 2cm x 2cm...... it must look exactly like the one below The crown will be used to repair a period cap badge
__________________
Cofion gorau Gruffydd M-J www.paoyeomanry.org.uk "A Yeoman from the Stalwart Rural Cavalry" Lechyd da pob Cymro Last edited by GriffMJ; 28-07-11 at 11:17 PM. |
#2
|
||||
|
||||
Hi Griff,
I've got plenty of the larger types but only one like the one you have pictured. Sorry. Cheers, Tinto |
#3
|
||||
|
||||
I have spare a QVC rank crown if you'd like it. I'll try and find it to measure, scan etc.
|
#4
|
||||
|
||||
Thanks Julian ..... but it has to be "exactly" as seen above (KEVII)
__________________
Cofion gorau Gruffydd M-J www.paoyeomanry.org.uk "A Yeoman from the Stalwart Rural Cavalry" Lechyd da pob Cymro |
#5
|
||||
|
||||
So you didn't mean c1900 then !?
|
#6
|
||||
|
||||
Hi Julian
LOL!...... I have got your blood up again with the century thing (Sorry) The period of King Edward VII's reign circa 1902-08, gilding metal die stamped rank crown as seen above, approx 2cm x 2cm. The type that Staff Sgts wore above their chevrons. It has to be exactly as the one above
__________________
Cofion gorau Gruffydd M-J www.paoyeomanry.org.uk "A Yeoman from the Stalwart Rural Cavalry" Lechyd da pob Cymro |
#7
|
||||
|
||||
Crown
Griff,
Is this one suitable: Tim
__________________
"Manui dat cognitio vires - Knowledge gives strength to the arm" "Better to know it but not need it than to need it and not know it!" "Have more than thou showest, speak less than thou knowest." |
#8
|
||||
|
||||
Hi Tim
It looks different to me ..... but thank you very much anyway
__________________
Cofion gorau Gruffydd M-J www.paoyeomanry.org.uk "A Yeoman from the Stalwart Rural Cavalry" Lechyd da pob Cymro |
#9
|
|||
|
|||
Quote:
this pattern crown was worn throughout the period 1901 to post 1952... I'm sure we've been down this road before with your theories on RD badges, but there was NO difference in the King's or imperial crown on change over of monarchs, just makers variations! Andy |
#10
|
||||
|
||||
Quote:
__________________
Cofion gorau Gruffydd M-J www.paoyeomanry.org.uk "A Yeoman from the Stalwart Rural Cavalry" Lechyd da pob Cymro |
#11
|
|||
|
|||
Quote:
I'm sending some stuff up to Dave next week, I may have a crown which would be suitable what are the dimensions in mm N-S, E-W.. Andy Last edited by 2747andy; 29-07-11 at 09:30 PM. |
#12
|
||||
|
||||
approx 2cm x 2cm gilding metal die stamped.
__________________
Cofion gorau Gruffydd M-J www.paoyeomanry.org.uk "A Yeoman from the Stalwart Rural Cavalry" Lechyd da pob Cymro |
#13
|
||||
|
||||
Hi Griff, and others,
I think the crown you need is as the one on the right in this picture. It measures 2x2cm and has lugs E-W. Hope this helps to get you the right badge. Cheers, Tinto |
#14
|
||||
|
||||
Hi Tinto
The image below shows the particular "makers varient" crown I am after front and back, also showing the crown I need to replace because of the damage to the orb.
__________________
Cofion gorau Gruffydd M-J www.paoyeomanry.org.uk "A Yeoman from the Stalwart Rural Cavalry" Lechyd da pob Cymro |
#15
|
||||
|
||||
These are the right Crowns (polishing wear)...... but they are collar badges. I am just trying to find out what size they are.
__________________
Cofion gorau Gruffydd M-J www.paoyeomanry.org.uk "A Yeoman from the Stalwart Rural Cavalry" Lechyd da pob Cymro |
|
|