|
|
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Rifle Brigade KK 705 smaller OSD
Having read some previous informative threads on The Rifle Brigade, especially those by a member called Charlie who sold off an extensive collection of RB badges some years ago; I’d like to show a recent acquisition of a bronze OSD for comments.
I have photographed the OSD badge next to a common 1905 OR’s which is KK 705 and previous threads show as sealed pattern 44091D. The measurements are approx. h 47mm x w 40mm. Hopefully, the photos show clearly that the OSD from this same pattern is a bit smaller being h 44mm x w 36mm. Measured using a school ruler so measurements are approximate. The threads unfortunately became a bit confusing with multiple references to larger and smaller badges from earlier and later patterns. So any reasons for the size of this OSD badge? Last edited by dubaiguy; 12-05-21 at 12:20 PM. |
#2
|
||||
|
||||
Greetings.
It would appear that your Officer's badge is a cast item. A cast from a mould of a badge will render it somewhat slightly smaller than the actual size of the donor badge. Hope this answers your question. Regards. Brian |
#3
|
||||
|
||||
Thank you Brian, that knowledge is very useful.
Mark |
#4
|
||||
|
||||
Hi Mark, Brian’s covered it perfectly, nice badge and if ever you want to move it on remember me please
Gerard
__________________
Always interested in buying cap badges to the Middlesex Regt-Hertfordshire Regt-The Rifle Brigade |
|
|