|
|
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
HELP! Slider loose on anodised badge
Hello
Some help required please! The slider has become loose on my anodised Firmin Ayrshire Yeomanry cap badge How can I fix this please? Cheers all Chris |
#2
|
||||
|
||||
A/A repairs
If the slider is still attached to the badge, carefully put some glue (epoxy resin) around the slider and await for the glue to set.
Hopefully this will reinforce the slider without damaging the badge. Rob |
#3
|
||||
|
||||
Slider is still attached, epoxy resin it is, cheers Rob.
I didn't want to use anything that would damage the badge. Cheers Chris |
#4
|
||||
|
||||
I've used a good quality super glue in the past, building up the repair in several layers, did the job!
Tony.
__________________
For Christopher night night son. |
#5
|
||||
|
||||
Cheers Tony,
I'll think I'll go with the apoxy resin, I've looked it up and seems like the best stuff. I'll grab some tomorrow and see how it goes. Cheers anyway Chris |
#6
|
||||
|
||||
Fixing A/A
I've used a good quality super glue in the past, building up the repair in several layers, did the job!
Tony. Probably a good way of a repair as well, several layers are needed and they do not show as much as epoxy resin. Not sure of the durability. Rob Last edited by Sonofacqms; 04-09-22 at 10:24 AM. |
#7
|
||||
|
||||
Durability is what I need Rob, I think the apoxy resin would be more durable, we'll see later today
|
|
|