|
|
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
Advice sought. Collars or cap badges?
Gents, the two attached I've had for many years and am happy they are right - unless advised otherwise. What I am unsure of, is if they are cap badges or collars? Advice appreciated.
Thank you guys Bess |
#2
|
|||
|
|||
In my opinion both are collar badges (The King's Own being an officers collar badge). There is no reason why either couldn't have been worn as cap badges although I don't think that was the original purpose for either.
PL |
#3
|
||||
|
||||
I agree.
|
#4
|
||||
|
||||
It's possible, but in this case I think unlikely, the King's Own was originally gilt which has been rubbed back to base metal, in which case it would/could be a cap badge.
|
#5
|
||||
|
||||
Thank you guys, appreciated as ever.
Bess |
#6
|
||||
|
||||
In any case, it is usually agreed that Jennens marked any OR badges (if they did make OR badges at all)!
|
#7
|
||||
|
||||
From the photographs, I would say the King's Own is simply a bronze OSD collar with wear to it's obverse.
|
#8
|
|||
|
|||
Quote:
Cheers, Alex |
#9
|
|||
|
|||
Similar question.
Guys,
I've a similar question as to a badge I recently purchased. It's had (crude) copper loops fitted in place of the missing blades. The JR GAUNT LONDON is so small it is difficult to read even with a magnifying glass! But I don't think there are any dots between the letters. Again, I suppose this is a cap badge as opposed to a collar badge? I'm only saying this because it seems a bit large for a collar, but obviously I could be totally wrong. It was described as Edwardian, but I've no idea how to check this. Any info would be helpful. Cheers, Leo |
#10
|
||||
|
||||
Collars were generally lugged whilst the blades were for cap badges.
|
#11
|
||||
|
||||
An officer's badge perhaps described as "Edwardian" in order to represent the badge as an OR's lugged cap badge of that period rather than the later slidered version?
|
#12
|
|||
|
|||
Thanks for the prompt replies guys.
I think I'll describe it in my notes as an Officers cap badge then? Thanks again. |
#13
|
||||
|
||||
I would not necessarily say it was Edwardian, but, it is certainly a pleasing old cap badge, a great shame it is missing it's original blades.
Quote:
|
#14
|
|||
|
|||
Another thing is, it's quite weighty. Cast bronze as opposed to die stamped brass I suppose?
|
|
|