|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Reconnaissance Corps Badge for your approval
Gentlemen,
How are you? I would very much welcome your opinon on the originality of this badge. Thank you! Cheers, Tom Last edited by kaiserwilhelm2; 02-06-21 at 06:07 AM. |
#2
|
||||
|
||||
Out of my period, but I understand the connection of the slider with the lightning forks was bent to the angle of the forks- hard to explain. Not sure if die stamped was more usual. Regards, Paul. https://www.britishbadgeforum.com/fo...aissance+Corps If you had searched for this badge on the forum you would have found this thread which looks to give this type positive opinions. This thread shows the slider attachment method I was thinking of. https://www.britishbadgeforum.com/fo...aissance+Corps
Last edited by wardog; 02-06-21 at 04:03 PM. |
#3
|
|||
|
|||
Thank you Paul!
|
#4
|
||||
|
||||
Tom can you post an image of the slider/badge joint?
Tony.
__________________
For Christopher night night son. |
#5
|
||||
|
||||
Looks a standard slider, the correct/usual slider would be appear pointed at the bend.
|
#6
|
|||
|
|||
Hi Tony, Is this what you are looking for? If not, please let me know. Thanks for your response. Cheers, Tom
|
#7
|
||||
|
||||
I think this fitting is described in post #2.
I'm sure that flat bent sliders are ok too, it just makes the badge slightly more fragile. |
#8
|
|||
|
|||
Hi Luc, thank you for those pics which clearly illustrate what was probably expressed by Paul. Clearly mine does not have such a set up. If that is significant I do not know. Cheers, Tom
|
|
|