|
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
New Zealand Cyclists Company
Does anybody know anything about this unit. The badge is 50 x 35mm
|
#2
|
||||
|
||||
|
#3
|
||||
|
||||
|
#4
|
|||
|
|||
Brilliant,many thanks.Andrew
|
#5
|
||||
|
||||
Also very rare.
If you're looking to sell, I'd be very interested. Cheers, Tim |
#6
|
||||
|
||||
What a splendid badge,
Neve seen one before, so lovely to see. Cheers, Roy
__________________
Collecting: Despatch Rider Insignia & Photographs. Author/Dealer in the Fairbairn Sykes Fighting Knife My website: www.fsknife.com |
#7
|
||||
|
||||
Quote:
The badge itself, was designed by Smith & Sherlaw who were Jewelers in Featherston camp, their 1st Cyclist Company badge design was registered on the 6th April 1916. The badge IMO was never issued as is mentioned in one of the links, instead it would have been sold over the counter. |
#8
|
||||
|
||||
Made by a Wellington maker, C.M. Bay. You may find that it has a very small "R.D." (Registered Design) number on it somewhere - e.g. "R.D. 380".
I've heard that Bay (or his agent) would visit the camp(s) on a semi-regular basis to take orders and even produce designs for them. At the back of my mind too is a half-remembered story that they had what we would today call a "pop up shop" selling the badges. |
#9
|
||||
|
||||
At the bottom of the badge.
|
#10
|
||||
|
||||
Quote:
Many Jewellers/Watch makers set up shop within the military camps during WW1, so it wouldn’t surprise me that Bay was one, but so far have seen no advertising evidence that supports Bay opened a shop at either Trentham or Featherston camps. The Registered Design / RD number at the bottom of both the Reinforcement Cyclist Cap and collar badges is RD838-9. Both RD838 and RD839 are registered to Smith & Sherlaw, Watch Makers and Jewellers from Levin who set up a shop at Featherston Camp. The following cropped WW1 photo shows Smith & Sherlaw’s shop at Featherston Military Camp. This cropped WW1 photo shows J, E. Fitt, Watch Maker and Jeweller shop at Featherston Military Camp. |
#11
|
|||
|
|||
Hi Guys,
A nice badge macandpud. Yes Brent, I can confirm too that both my cap and collars are marked to base as RD 838-9. Can you tell me anything about the other NZ Cycle Corps badge pictured. Many thanks James |
#12
|
|||
|
|||
Further to the C M Bay query, Its extremely rare to see any maker marks other than RD numbers to Reio badges.
Attached is a 19th Collar, which has a maker mark, but I can't figure it out as its so faint and also with age, my eye's aren't what they used to be (even with glass and a magnifying glass!!!!)...:-).... It has no RD number to front. The NZ Army Ordnance Dept Badge is just to show a C M Bay maker mark. All the best James |
#13
|
||||
|
||||
Quote:
"RARE New Zealand Cycle Corps Brass Hat Badge. This early badge predates the Territorial era and was worn in Auckland by the Volunteer Cycle Company there. It was very possibly revived early in WW1 when the Cyclist Company was formed at Featherston as there are bronze and white metal examples of this badge that appears to be WW1 manufacture." http://www.diggerhistory.info/pages-.../nz-specs2.htm New Zealand site has one for sale at $850.00 |
|
|