British & Commonwealth Military Badge Forum

Recent Books by Forum Members

   

Go Back   British & Commonwealth Military Badge Forum > British Military Insignia > General Topics.

 Other Pages: Galleries, Links etc.
Glossary  Books by Forum Members     Canadian Pre 1914    CEF    CEF Badge Inscriptions   Canadian post 1920     Canadian post 1953     British Cavalry Badges     Makers' Marks    Pipers' Badges  Canadian Cloth Titles  Books  SEARCH
 
Reply
 
Thread Tools Display Modes
  #1  
Old 08-05-19, 04:54 PM
billy's Avatar
billy billy is offline
Member
 
Join Date: Mar 2011
Location: Carterton (RAF Brize-Norton) Oxfordshire
Posts: 2,585
Default Gilding of Officers Badges

Hi have acquired an Officers Royal Irish Fusiliers (K & K chapter 18, fig 936 ) looked fine but grubby - rear was awful! after cleaning, soft tooth brush and soap had removed majority of muck I could now see gilding was polished off in some places and a lot of crap between Eagle and Ball, so gently prised open fixings to remove this, it was absolutely jam packed with old residue of Polish and gone hard so had a good time clesning this all up -NOT! Why had it been polished???

Well you may ask what is the point of all this rambling? (Did have pictures but lost them on the phone - trying to retrieve them? ), while all apart did a bit of repair to original screw posts and remembered a bloke to whom I took Electronic components to have Gold Plated (Gilding), so went looking for him and still there! Result, had the badge with me to show him and see what I could do to further putting it back to its former glory, nothing! He would sort out the polishing and cleaning of both parts, Ball and Flames different finishes Gilded, - Eagle cleaned and Silver plated, so left them there.

Just popped in today, left them with him on Thursday 2nd May, today is the 8th and all finished! the badge looks outstanding some nicks still visable but not too apparent, but you can only polish so much without damaging the badge! Am popping in tomorrow to pick up badge and can show photo's of the finished article, but its like a new badge, and will seek out the original ones also.

When I went seeking information on the Forum for re-gilding it went back only to 2008 and Davec was doing the badge for a member but outsourcing gilding to a friend, hopefully if other members like what they see they can know there is someonevout there who can do this! Also maybe members may know someone and we can compile a lst of good restorers of badges? All the best billy
Attached Images
File Type: jpg Screenshot_2019-05-08-19-26-23.jpg (31.0 KB, 87 views)
File Type: jpg Screenshot_2019-05-08-19-26-20.jpg (48.8 KB, 65 views)
File Type: jpg Screenshot_2019-05-08-19-26-13.jpg (44.8 KB, 54 views)
File Type: jpg Screenshot_2019-05-08-19-25-41.jpg (28.9 KB, 32 views)
File Type: jpg Screenshot_2019-05-08-19-25-36.jpg (47.9 KB, 32 views)
File Type: jpg Screenshot_2019-05-08-19-26-10.jpg (45.3 KB, 39 views)
File Type: jpg Screenshot_2019-05-08-19-26-06.jpg (51.8 KB, 32 views)

Last edited by billy; 08-05-19 at 06:31 PM.
Reply With Quote
  #2  
Old 09-05-19, 05:18 PM
billy's Avatar
billy billy is offline
Member
 
Join Date: Mar 2011
Location: Carterton (RAF Brize-Norton) Oxfordshire
Posts: 2,585
Default Gilding to R.I.F. badge

Here is the finished badge! Has some dings possibly from when it was first made? These are covered up when Eagle is applied to ball, am well chuffed with results!

Anyone needs this done I now know a man!
Attached Images
File Type: jpg 20190509_175442-1.jpg (42.7 KB, 45 views)
File Type: jpg 20190509_175453-1.jpg (39.0 KB, 22 views)
File Type: jpg 20190509_175534-1.jpg (34.8 KB, 20 views)
File Type: jpg 20190509_175604-1.jpg (29.5 KB, 18 views)
File Type: jpg 20190509_175640-1.jpg (26.3 KB, 14 views)
File Type: jpg 20190509_175710-1.jpg (54.7 KB, 26 views)
File Type: jpg 20190509_175726-1.jpg (46.3 KB, 12 views)
File Type: jpg 20190509_175819-1.jpg (41.1 KB, 51 views)
File Type: jpg 20190509_175826-1.jpg (40.5 KB, 21 views)
File Type: jpg 20190509_175832-1.jpg (46.9 KB, 33 views)
Reply With Quote
  #3  
Old 09-05-19, 05:30 PM
mm1 mm1 is offline
Member
 
Join Date: Sep 2012
Posts: 1,262
Default badge

Nice job but personally, I prefered the badge as it was - hey ho - each to their own...

Mark
Reply With Quote
  #4  
Old 09-05-19, 06:01 PM
billy's Avatar
billy billy is offline
Member
 
Join Date: Mar 2011
Location: Carterton (RAF Brize-Norton) Oxfordshire
Posts: 2,585
Default

Hi Mark photos on original post didn't show how the Copper was showing through the Gilding along sides it had virtually gone due to polishing, I like well worn badges and have them side by side in my collection, well worn polished with pride! A lot of years and shows service from new intakes!

Last edited by billy; 09-05-19 at 08:05 PM.
Reply With Quote
  #5  
Old 09-05-19, 07:59 PM
norfolk regt man's Avatar
norfolk regt man norfolk regt man is offline
Member
 
Join Date: Feb 2010
Location: norfolk
Posts: 2,216
Default

Nice post, will be in touch
Reply With Quote
  #6  
Old 10-05-19, 01:38 AM
Tiger Pete's Avatar
Tiger Pete Tiger Pete is offline
Member
 
Join Date: Nov 2013
Posts: 406
Default

Hi Billy,

Beautiful badge! PM sent.

KR,

Pete.
Reply With Quote
  #7  
Old 10-05-19, 07:59 AM
leigh kitchen's Avatar
leigh kitchen leigh kitchen is online now
Member
 
Join Date: Nov 2010
Posts: 9,034
Default

Quote:
Originally Posted by mm1 View Post
Nice job but personally, I prefered the badge as it was - hey ho - each to their own...

Mark
I very much agree, but as said, each to his own.
Reply With Quote
  #8  
Old 10-05-19, 08:56 AM
badgecollector's Avatar
badgecollector badgecollector is offline
Member
 
Join Date: Feb 2008
Posts: 4,239
Default

hi Billy
it looks very much like gold plating rather than gilt that you would expect from a period piece.
I have looked at the various types of gold plating and finishes that they offer and I personally think that the pre polished (polishing is the final process) gives it a better finish?
still a nice item
cheers
bc
Reply With Quote
  #9  
Old 10-05-19, 09:58 AM
Neibelungen Neibelungen is offline
Member
 
Join Date: Nov 2011
Posts: 239
Default

A lot of the style of gilding will depend on both the date of manufacture and the method used to appy gilding.
You have the traditional mercury fire gilding, done by evaporating gold 'dissolved' in a mercury amalgum 'butter' which creates a thick gold bonded to the surface, often 8 to 20 microns thick. Typically this can be identified with a very matt finish and a distict border appearance to the rear that was not coated. Fire gilding is usually in the 18 to 23.5 carat range.

Most gold electroplated up to the 1960's or 70's was usually a 'soft' gold. Basically a carat alloy of one form or another without any trace elements to increase the surface hardness. Usually this was done without the use of a nickel underplate and was often in the range of 3 to 8 microns.

With advances in chemistry from the 60's onwards, various trace elements were added to the gold alloy plates, such as nickel, iron and cobalt, in the 0.1% range, increasing the surface hardness and wear resistance by around 3 fold. (from 60-80 HV to 200-240 HV)
Additionally grain refiners and other chemicals allowed the creation of bright golds and with nickel underplates along with the increasing cost of gold, thicknesses were reduced to around 0.2 to 2 microns range on average.

Matt gold electroplating is still possible, though these are soft 24k primarily for the electronics industry.
Modern buttons are usually now done in bright gold with a heavy matt laquer which is subsequently selectively removed to give the appearance of burnishing.

Hopefully the link below will work, and shows the refurbishment of postillion buttons for the Royal Household and the burnishing method that was traditionally done of fire gilded items.

[URL="https://www.facebook.com/162795927083995/videos/684641111992816/?eid=ARBQip-SvXIRb-2CzYDq1yfFuvHwvxdmW3RSgR2D8jQbdGX_0oRyjr5kQEpRqO6Y Bq01PJZFTaJvwSqT"/URL]
Reply With Quote
  #10  
Old 11-05-19, 03:58 AM
fairlie63's Avatar
fairlie63 fairlie63 is offline
Member
 
Join Date: Dec 2014
Location: Claremont, Tasmania
Posts: 1,366
Default

Interesting Neibelungen, thanks for the link.

Keith
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

mhs link

All times are GMT. The time now is 10:17 PM.


Powered by: vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.