|
|
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
Rare Malta Royal Artillery Anodised (Buttons LTD)
This beauty was amongst a small collection I acquired last week.
I believe Buttons Ltd is the rarer of the 2 makers of the A/A badge. ABE2F636-4C08-4703-9853-FA45117CD83A.jpg 0E07E851-A6B0-47FE-8CE6-72B3C648275B.jpg D5AE5A8A-67B3-4CA1-A8AD-EBF1429BB2E1.jpg D8D23360-0178-4CD7-AC1F-9CB3C717AB7D.jpg |
#2
|
|||
|
|||
Hi Jon,
Yes, it's a scarce badge also made by Firmin London. Both a/a maker marked versions are fairly scarce in my opinion. Well done a good find. Regards Colin |
#3
|
||||
|
||||
Here is the FIRMIN LONDON version picked up in a mixed job lot last year.
Tim
__________________
"Manui dat cognitio vires - Knowledge gives strength to the arm" "Better to know it but not need it than to need it and not know it!" "Have more than thou showest, speak less than thou knowest." |
#4
|
||||
|
||||
A lovely looking badge!!!
Terry |
#5
|
||||
|
||||
Good work Jon, these are beautiful badges that are generally a bit elusive. I have the large Buttons and Firmin example and a third which has a wheel without rivets. The slider is clipped unfortunately so no makers mark present.
The smaller beret badge is scarce too and I believe generally found 'without' the crown (having been removed from badges worn post 1971 as I understand it). My example has a fully blank slider. |
#6
|
||||
|
||||
Very nice find Jon. Well done!
Haven't come across a Buttons Ltd. one as yet. Another to add to my Wants List! Vincent |
#7
|
||||
|
||||
Quote:
Thank you, Vincent |
#8
|
|||
|
|||
ROYAL MALTA ARTILLERY
Hi All,
Just received mine, purchased from a reputable dealer (via ebay) a couple of days ago and whilst i am certain that it is genuine, it has a couple of noticeable differences from those already shown. It is Buttons Ltd and the mark is quite clear although the slider has been cut down. The differences - the tips of the star at the crown are not tips but are parallel with the base of the badge making it look more like the Scottish saltire. In addition there is no void above the gun chain.... In many other ways it matches the Buttons items already shown for instance on the rear view photo you can quite easily see the vertical mould mark at the base of the star on the right which points out at the 2 o clock position. (hope i have described that well enough for you to see what i am getting at) Although its different i'm sure as i say that's its genuine and i am happy to add it to my ever growing collection of Buttons Ltd AA cap badges. Any comments welcome Steve |
#9
|
||||
|
||||
Thats odd Steve . . .it looks exactly the same on the rear. The voiding on the gun chain is probably a manufacture error in the 'piercing' stage. Have the tips of the Maltese cross each side of the crown, been filed down carefully? For example if one of them snapped off or broke and the badge was cleaned up for continued wear?
Just a thought. |
#10
|
|||
|
|||
Sean,
No - no signs of damage or of them being filed down. Looking at them again i can still see the shear marks from when the piece has been cut out of the aluminium sheet. makes for an interesting addition and as Vincent said perhaps it was a 'reject' or unfinished piece that somehow made it way out of the factory door unnoticed. It was IMO a reasonable price and to be honest i did not notice the differences until i had it in my hand and checked it against 'No Bull' and the photo's in this post. I am sure it will remain a mystery but that's just part of the fun of collecting. Regards Steve |
#11
|
||||
|
||||
Steve, sounds perfectly reasonable to me mate.
And yes, the oddities are what make all this interesting. An interesting example. Bess |
#12
|
||||
|
||||
Thanks for your information
Cheers guys for the info.
Well outside the sphere of my collecting interests. Stay safe Jon |
#13
|
||||
|
||||
Managed to get my hands on a overprint Buttons Ltd/Firmin London variant. All there's missing is the Buttons Ltd one.
|
#14
|
||||
|
||||
Firmin London version arrived today from the end of last year, in very good, probably unused, condition
__________________
Regards, Jerry |
#15
|
|||
|
|||
Quote:
Steve |
Thread Tools | |
Display Modes | |
|
|