|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
RFC Metal Wing
Not sure about the age or use of this metal wing ... had it for a few years ... did not cost the earth .. but would be interested to know if it is a fake/copy and what it was trying to be ...
Many thanks Gary |
#2
|
|||
|
|||
used for picture frames....sadly.
..possibly a restrike, often sold as original pilots wings as used in ww1....incorrectly. best wishes steve |
#3
|
||||
|
||||
I agree with arrestingu. It is my understanding that any metal wing with horizontal tangs (blades) were never worn on or issued to pilots for their uniforms during the war.
The front side is still a very nice impression. Hard to date your example exactly. |
#4
|
||||
|
||||
"did not cost the earth" very glad to hear that, but, that in turn should have spoke volumes in itself at the time.
|
#5
|
||||
|
||||
Following up on the initial post in this thread*, I picked up another identical example of this style of RFC wing from a recent British Auction House. Flight Badges of the Allied Nations 1914-1918 (2016) by Robert Pandis is an excellent and detailed book which covers the many variations of this wing. On page 27, they refer to this Jennens (J&Co) bronze wing as being the third Fattorini design variation due to the wear marks on the die.
Both these examples match the size and weight of the example on page 27 in the book. What isn’t clear to me is exactly when these were produced. Perhaps others have some information on this? Photos show the front and back of this recent purchase and another showing my two examples (most recent on bottom and on the right). *Correction: I actually meant to attach this to the following Thread but a similar topic in both. https://www.britishbadgeforum.com/fo...ad.php?t=49573 Last edited by zorgon; 25-06-19 at 10:25 PM. Reason: Added reference to correct link |
#6
|
|||
|
|||
Hi
I believe some are period or used Gaunt moulds , they are Not legit pilot badges. Copies are definitely out there bladed and otherwise . Regards Steve |
|
|