|
|
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
9th Lancers/14th/20th Hussars ideas
I have two items for the 9th Lancers and 14th/20th Hussars of which I am not sure of their purpose.
The 9th Lancers is cut from sheet brass, 40mm wide, 28mm high with lugs 18mm long. The 14th/20th Hussars is in blackened white metal with small screws N-S, this is the same size as the normal 14th/20th Hussars, I did think this could be from a car badge but who would want a blackened car badge? Any thoughts would be welcome. Rob |
#2
|
||||
|
||||
The 14th/20th badge - possibly an arm badge without its oval backing plate, it appears identical including the n/s screwposts.
A KRH one: Last edited by leigh kitchen; 10-12-19 at 08:07 PM. Reason: Add image. |
#3
|
||||
|
||||
The eagle may not be 14th /20th.
We mentioned a few weeks ago that the Royal Gurkha Rifles use the eagle as a pouch badge. This would fit with the screw fittings. |
#4
|
||||
|
||||
14th/20th
Thanks chaps, as always some good answers to my problem, probably needs to go on the Ghurka board.
Rob |
|
|