|
|
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
Officers the Buffs
Hi thought to share this recent purchase, just picked up from the sorting office today and after a few clean ups! have found it to be a nicely used Officer's (which I assumed it to be before acquiring), - badge was well disguised! Tried to get a shot of badge before purchase on a screenshot but Tablet throws up "Insecure site?" when trying to get in? Very frustrating!
If anyone can do magic with listings on Ebay item was " The Buffs - East Kent Rgt " on Endici. Rear shot can see a "P" as no Hallmarks, all the best Billy |
#2
|
||||
|
||||
Hey Billy
My first impression is it’s not silver. I know the P indicates it plated but it doesn’t look the colour I’d expect. Also I’m curios as if it’s a silver plated badge wouldn’t the lugs be silver plated also? Unlesss all the silver has been removed or washed of or never applied? BC |
#3
|
||||
|
||||
Hi B.C. the lugs have remnants of Silver plating, the badge is heavy, and Solid, the lighting I took the photo's in wasn't the best, the badge itself is not doing wellnon the white paper test, but have just cleaned it? don't know if that would count though? There is discolouration to the badge that you see on Silver badges? accept your thoughts regards "P" plated, can "P" also be used on Solid Silver badges? Look forward to the Forum's viewpoint! Cheers Billy
|
#4
|
||||
|
||||
As BC says P indicates Silver Plated. A solid silver badge would be HM’ed or marked sterling etc. if marked. Also you would not get copper loops on a solid silver badge but they are found on plated badges.
Nice badge but it’s had a hard life by the looks. Scales are worn flat in several places which would I think be more than enough to remove the plate and some in those areas... I wonder if it’s been re-plated lately. I’m sure a collector or officers or silver badges will be able to tell you for sure. |
#5
|
||||
|
||||
What did you clean it with? I use Goddards silver dip and that takes every bit of tarnish off the sliver plate.
|
#6
|
||||
|
||||
Hi Luke I like it that its had a hard life, its been in the Field, and being used!
Cleaned it with soap and toothbrush, then went searching in the cuboard and found the Silverdip (Goddards) which I applied and left whilst watching the Rugby! Washed off with toothbrush and Hot water! Marinus that is Magic what you have done! As can be seen badge was a mite grubby so you can see it has cleaned up well, wondering still what the badfe is made off? as you say "P" stands for plating, lugs show this perfectly! Many thanks Billy |
#7
|
|||
|
|||
Hi All
Sorry to contradict but you can and do get copper lugs on solid silver badges, it is quite common depending on the maker. As the this badge, nothing wrong with it but the apparent wear might just be from a worn die? As mentioned, polishing to that extent should have taken away the plating. Cheers, Alex |
#8
|
||||
|
||||
eBay item number:383811637891
Quote:
All the best, Marinus |
|
|