British & Commonwealth Military Badge Forum

British & Commonwealth Military Badge Forum (https://www.britishbadgeforum.com/forums/index.php)
-   The Australian General Service Badge (Rising Sun) (https://www.britishbadgeforum.com/forums/forumdisplay.php?f=66)
-   -   1st Pattern Rising Sun Badge - Circa 1901 (https://www.britishbadgeforum.com/forums/showthread.php?t=1765)

slick_mick 05-05-08 10:11 AM

1st Pattern Rising Sun Badge - Circa 1901
 
1st Pattern Rising Sun Badge - Circa 1901

Worn by the Australian Commonwealth Horse during the Boer War.

http://i305.photobucket.com/albums/n...ealthHorse.jpg

Mick

David Moore 27-05-11 09:01 PM

Hi Mick, I have just bought a first pattern badge which is almost identical to yours. What I would like to Know is, have I got a collar or cap badge? The badge I have just aquired is approx the same size as later collar badges.

Best wishes Dave Moore.

Lancer 17 31-05-11 06:13 AM

!st Patern Rising Sun Badges
 
G'day Dave

According to Jeff Cossum's book on rising sun badges the cap badge was 32mm, so it looks like its a cap although its about the same size as later collar badges. While have seen a few over many years, l have never seen a large one. If you have one they are a very rare badge ........... Congrats.

Regards

Phil.

2747andy 31-05-11 07:26 AM

Someone knew what they were bidding on then!

http://cgi.ebay.co.uk/390303433627?r...fvi%3D1&_rdc=1

Andy

David Moore 04-06-11 12:00 PM

Thanks
 
Thanks for your help, the badge is 32mm at its widest point and has a dark patina. It came from a very old collection, so I am confident in its authenticity.

Best wishes Dave Moore.

David Moore 04-06-11 12:03 PM

PS
 
It is not the badge from ebay.

Dave Moore.

David Moore 06-06-11 08:24 PM

Quote:

Originally Posted by Lancer 17 (Post 115604)
G'day Dave

According to Jeff Cossum's book on rising sun badges the cap badge was 32mm, so it looks like its a cap although its about the same size as later collar badges. While have seen a few over many years, l have never seen a large one. If you have one they are a very rare badge ........... Congrats.

Regards

Phil.

G'day Phil, My 1st pattern badge is posted on my introductory page, I would appreciate any comments. It comes from a regular source. I have never actually handled one before so am not 100% sure. I hope its right.

All the best Dave Moore.

David Moore 08-06-11 09:21 PM

Quote:

Originally Posted by Lancer 17 (Post 115604)
G'day Dave

According to Jeff Cossum's book on rising sun badges the cap badge was 32mm, so it looks like its a cap although its about the same size as later collar badges. While have seen a few over many years, l have never seen a large one. If you have one they are a very rare badge ........... Congrats.

Regards

Phil.

Hi Lancer 17, the 1st pattern badge is posted on my introduction page, I would value any opinion. I havn't mastered the camera yet so the image is not that close. In reality the bronzing appears lighter and is worn on high spots which isn't so apparent in the picture.

Best wishes Dave Moore.

vigilans 09-06-11 05:00 AM

I hate to burst the bubble but....its a collar badge.
Cossum describes the badge as 32 mm HIGH!!
1st Patt badges are a bit smaller than a standard RS hat badge, i.e 50mm LONG
Collars still sell on feebay for up to $300+ AU
Vigilans

David Moore 09-06-11 01:26 PM

1st pattern rising sun collar badge
 
Hi, my badge is 24mm high, the rope at the base is 32mm wide and the greatest distance across the sun rays is 36mm. Despite the fact that it is a collar badge, it is still a wonderful badge, and I am pleased with it. It comes from a large collection which is being sold off slowly so the cap badge might appear. Thanks for your help.

Dave Moore.


All times are GMT. The time now is 06:41 PM.

Powered by: vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.