|
|
|
Thread Tools | Display Modes |
#31
|
||||
|
||||
Thanks Alan all very informative to a novice on fakes like myself. What does die strike reverse mean.
arty
__________________
Arty |
#32
|
||||
|
||||
Die cast = solid back with no detail
Die struck = mirror image of front detail. |
#33
|
||||
|
||||
Quote:
Die Cast - injection molding if two dies used or open cast if no reverse die. Die Struck - Two dies (obverse and reverse) brought together under pressure of which the rear my be blank, a mirror image or of rough detail. See Fake and Repros chapter of my book. Regards, Chris |
#34
|
||||
|
||||
QRIH A/A Cap Badge With Silver Crown.
Not sure if this is of interest. A QRIH A/A cap badge with silver crown not the usual gold. By J.R. GAUNT B'HAM.
|
#35
|
||||
|
||||
Straying away from AA - I have some bronze OSDs which look'die struck' . Isthis possible within thin metal and cheaply produced ??
Also some whichhave a 'plain' reverse and some with only a minor indentation - eg a "depression" in the area of the horse's back. |
#36
|
||||
|
||||
Quote:
Related to the thickness of the metal used perhaps...? Regards, Chris |
#37
|
||||
|
||||
Quote:
John |
#38
|
||||
|
||||
Quote:
Probably incorrectly made. Back of badge is gold so this was the last colour used in colouring this badge. As crown is also silver it seems that it was accidently 'stopped off' post silver dye application together with badge's harp and scroll. Badge then dyed gold and later stop off paint removed reveling previously dyed silver harp, scroll and crown. Badge would then be boiled in distilled water to seal aluminium pores and prevent ingress of dirt into the aluminium. Which is why they 'stay bright' ... Regards, Chris |
#39
|
||||
|
||||
Quote:
John |
#40
|
||||
|
||||
Quote:
Maker in order-FIRMIN LONDON, No maker, FIRMIN. Badge are the same size, Middle one shows smaller.
__________________
JERRY ROYAL ENGINEERS/BRITISH ARMY CORPS & SERVICES/BRITISH LEGION/ROYAL BRITISH LEGION (see albums) |
#41
|
||||
|
||||
Quote:
I have the silver a/a version. Alan, if you are wanting to sell your gold version, please pm me
__________________
"Success is not final, failure is not fatal: it is the courage to continue that counts." |
#42
|
||||
|
||||
Gerry and Phil, I've seen the silver version worn by security staff on the gate and entrance of Scotland Yard.
Tony.
__________________
For Christopher night night son. |
#43
|
|||
|
|||
Off message a bit?
The title of this post drew me in...
I am currently a reservist. Some of my units trade badges seem never to have been available, or at least not in the memory of my major unit! I have seen 1 which was manufactured c 1968. So we normally OFFICIALLY, or with tacit approval, employ Gurkha badges & obtain same via official channels, for those not available as the colours are just reversed. I have just had made a small batch of a rather obscure one. If they are the correct colours & ARE being worn when do they qualify as 'official'. In my humble opinion if a badge is worn it's REAL. |
#44
|
||||
|
||||
Red Rags,
I would be interested to see what badge you have made if possible. regards
__________________
Simon Butterworth Manchester Regiment Collector Rank, Prize & Trade Badges British & Commonwealth Artillery Badges |
#45
|
||||
|
||||
Quote:
I have one in two colours that came from a"reputable" dealer, not silly money but a shame to think it is now worth nothing. With the new rules in the sales section, does this mean it could not be sold on the forum?
__________________
Regards, Jerry |
|
|